SO MUCH MORE THAN FIREPLACES CALL TODAY! 732-531-1900
Contact Us
1643 Highway 35 N Oakhurst, NJ 07755



September Firewood Prep: Everything You Need to Know Before Heating Season

I know. You don’t want to start thinking about your fireplace yet. The weather is still warm. You’re still grilling outside. You’re more likely to use your fire pit than your fireplace. But that’s actually the point—you don’t want to wait until the temperature drops to start prepping your firewood. By then, seasoned wood may be harder to find, prices may increase, and deliveries can be delayed. September is actually the ideal time to prepare your firewood supply—before fireplace and wood stove season begins. Properly seasoned firewood improves efficiency, reduces chimney buildup, and creates safer, more enjoyable fires.

Why September is the Perfect Time to Prepare Firewood

Cooler weather is approaching, but it’s not time to throw on the parka, nor is the brutal summer sun beating down. If you chop your own wood, this really is the best weather. Even if you buy pre-chopped wood, the timing works out—demand hasn’t peaked and there’s greater availability of seasoned wood.

Starting now also means you're not scrambling to get it all done before the first cold front arrives. You’ll have more time to stack, organize, and inspect your wood supply. If there is a storage issue, you’ll have plenty of time to address it before the snow and rain arrive.

Start with the Right Firewood

Firewood should generally be seasoned for 6–12 months, even longer for dense hardwoods. Properly seasoned wood has a moisture content of less than 20%, so it burns cleanly. You can tell that your firewood is seasoned when:

  • It has cracked or split ends
  • It has a darkened or faded color
  • The bark begins to loosen
  • It weighs less than freshly cut wood
  • It produces a hollow sound when pieces are knocked together

It’s important to only burn seasoned wood. Green or unseasoned is:

  • Difficult to ignite
  • Produces less heat
  • Creates excessive smoke
  • Increases creosote buildup
  • Can contribute to chimney fires

Selecting the Best Wood Species for Heating

The majority of your wood should be hardwood, such as oak, maple, hickory, ash, and beech. These woods have higher heat output, longer burn times, and require less frequent reloading. However, softwoods such as pine, cedar, and spruce have their place. They are good to use as fire starters, during the shoulder seasons, or in fire pits. While modern fireplaces and stoves can safely burn seasoned softwoods, hardwoods are typically preferred for primary heating.

Proper Firewood Storage

Proper storage is all about keeping moisture and critters out. Seasoned firewood has very low moisture content. In order to keep it that way, it should be stored off the ground on pallets, racks, or runners, so the moisture from the ground doesn’t seep in. This not only prevents the wood from burning with smoke, but it also prevents wood rot and insect issues.

You should also cover the top of your firewood to protect it from snow and rain. But cover just the top—keep the sides exposed for airflow. Wrapping a tarp around the entire pile can trap moisture.

As tempting as it is to store your wood close to your home so you don’t have to run out in freezing weather, you should keep it at least 20-30 feet from your house. This prevents insects, rodents, and moisture from entering your home. For the same reasons, you should only bring in a small amount of wood at a time.

Inspecting Last Year’s Wood

If you have leftover wood from the last fire season, it’s important to inspect it before using it and ensure everything is properly stacked. Check your wood for mold or excessive rot and remove insect-infested pieces. Then restack any collapsed piles and rotate it so your older wood is easily accessible. You’ll want to burn the oldest wood first.

Estimate How Much Wood You’ll Need This Season

Once you’ve inspected your leftover wood, you should have an idea of what you will need to supplement it. How much you need will depend on whether this is your primary source of heat or just supplemental, the size and efficiency of your stove or fireplace, the size and insulation of your home, how frequently you burn, and—less predictably—how severe the winter will be.

Every household is different, but in general:

Usage Pattern Approximate Amount Needed
Occasional ambiance fires ½–1 cord
Weekend use 1–2 cords
Supplemental heating 2–4 cords
Primary wood heat 4–6+ cords

Don’t Forget Your Fireplace or Woodstove

Firewood prep is only part of getting ready for the season. In order to have a safe and comfortable heating season, you should schedule an annual chimney inspection. Your inspector will let you know if there are issues. If there are, take care of them before you light any fires. You can also inspect your gaskets and door seals on your own. And you should test your smoke and carbon monoxide detectors to ensure they are functioning properly.

Getting Ahead of Winter

With a little September preparation, you can be sure to have safer, cleaner, and more efficient fires all winter long. Purchasing, seasoning, and properly storing firewood now will help you avoid last-minute stress and be prepared for unexpected cold snaps. Whether you're preparing for your first wood-burning season or you're a longtime stove or fireplace owner, The Woodstove and Fireplace Store can help you get ready for a warm, comfortable winter. Contact us or stop by our showroom in Oakhurst to explore wood stoves, fireplace inserts, and expert advice.



Schedule
Service

CONTACT US TODAY Phone732-531-1900